AMC AT103i

Dolby Digital Decoder with 2 Digital Inputs & 1 Analog Stereo Input, Remote Control, Amplified Speaker System including Subwoofer & 5 Satellites

INTRODUCTION

The AT103i Audio Tornado from AMC is a complete Dolby Digital 5.1 channel surround sound system ideally suited for use with multimedia computer systems and game consoles.  It provides home theater performance from a DVD drive in a PC and enhances the realism and excitement of games designed for the newest generation of game consoles, including the Sony PlayStation 2 and Sega Dreamcast.

Full-featured yet simple to set up and operate, the AT103i provides various surround sound modes, including Dolby Digital (AC-3), Dolby Pro Logic, DTS, and Stereo.  Easily connected to virtually any audio source, the AT103i delivers home theater performance from DVD, TV, Satellite Dish, VCR, and much more.

Compact in size, the AT103i is the perfect choice where space is limited.  It is ideal for use in a home office, den, play room, bedroom or college dorm room.

The AT103i Audio Tornado system includes:

• Compact processor/controller with credit card size remote control

• Five shielded 3 full range satellite speakers for front, center and surround channels

• Front-firing 6.5 long-throw powered subwoofer

• Inter-connect cable and all necessary speaker wires

• Amplification for all speakers located in the subwoofer

Performance and Specifications

Processor/Controller

• Optical or Coaxial Digital Input

• Analog Stereo Input (RCA)

• Analog Outputs (Stereo Mini Jacks) - L and R Front, L and R Surround, Center and Subwoofer Channels

• G9 (DIN) Analog Output Connector connects all channels to subwoofer

• Physical Dimension:  (WxDxH)  7 x 5 x 2.75 (inch) or 178 x 128 x 69 (mm)

Speaker System - Satellites

• Wooden Enclosures

• 3" Full Range Drivers

• Physical Dimension:  (WxDxH)  4.5 x 4.5 x 4.75 (inch) or 115 x 117 x 120 (mm)

Speaker System - Subwoofer

• Wooden Enclosure

• 6.5" Long-Throw Driver

• Polypropylene Cone

• Front-Firing Ported System

• Subwoofer & Master Level Controls

• Physical Dimension:  (WxDxH)  8.75 x 9.25 x 12.75 (inch) or 222 x 235 x 321 (mm)

Amplification

• All Located in Subwoofer Enclosure

• Continuous Power:
  Subwoofer:  45W
  Satellite:  15W
  (ref: all channels driver, 1% THD)

• Dynamic Power:
  Subwoofer:  70W
  Satellites:  25W

• Frequency Response:
  Subwoofer:  40Hz - 200Hz
  Satellites:  200Hz - 20kHz

• Sensitivity:  250mV (all channels)

• Crosstalk:  >60dB (ref: 1kHz/1W)

• S/N Ratio:
  Subwoofer:  >100dB @ 45W A-weighted
  Satellites:  >90dB @ 15W A-weighted

• G9 connector

   

  Pin 1        GND (Ground)

Pin 2        GND (Ground)

Pin 3        GND (Ground)

Pin 4        L (Left Channel)

Pin 5        R (Right Channel)

Pin 6        SL (Surround Left)

Pin 7       SR (Surround Right)

Pin 8        C (Center)

Pin 9        Sub (Subwoofer)